Page 1 of 2
Remove fairing and existing Harley speakers.
Place grills on adapter with cloth-side facing towards rider.
Begin by positioning clutch-side adapter as shown.
DO NOT OVERTIGHTEN SCREWS
Clutch-side adapter shown
Outside Edge of Fairing
Step One: Mounting Adapter to Fairing
Titan II 7.1” Speaker
Installation Guide
BT7P1
ElectraGlide fairing
1996 to Present
Specifi cations:
Coaxial 180mm (7.1”)
2 way - 20mm tweeter, 180mm woofer
4 ohm impedance
Effi ciency - 92.6 dB/SPL
Frequency range - 45-22kHz
100 Watts RMS power, 200 Watts peak
Integrated crossover
Kit Contents:
(2) 7.1” Speakers
(2) Speaker Adapters
(6) #10x⅞” Screws
(8) #6x¾” Screws
(2) Cloth-Covered Grills
Position adapter
so the “missing”
screw hole on the
adapter is on the
inside-bottom.
Brake-side will be
the mirror image
of this photo.
Use new #10x⅞” screws in these three holes
B I K E T
R O N I
C S