GUANGDONG ACES MACHINERY CO.,LTD
45
cleaning solution , and finally moisturize the print-head.
With more than 30 days of shutdown, after cleaning the print-head with cleaning
solution, remove it for moisturizing.The standard of protection is to ensure that the
print-head is filled with protection solution, two ink supply tube nozzles are
blocked
tightly, the surface of the print-head is sealed with plastic wrap, the whole print-head is
sealed and encapsulated in an electrostatic bag.
（
Note
：
In the above moisturizing steps, before adding print-head protection solution,
cap should be kept dry and no water residues,including tap water, distilled water,
pure water, etc.
）
Chapter 7 Common Problems and Treatments