GUANGDONG ACES MACHINERY CO.,LTD
24
4.Calibration before printing
Note:Only connect to the print-head and enter the next text after all the Motion Test and
circuit are normal. Generally, the actual print height is 3.5mm - 3.8mm. Please make sure
that the print height is appropriate after print-head installation.
4.1
．
Print-head Voltage
4.1.1
Voltage and Temperature setting
It is recommended to first set the print-head temperature and Voltage Correction to 0
Check if the print-head voltage of each corresponding channel is correct. Generally, the
Starfire print-head voltage is between 95V and 105V, and check if the temperature displayed
is consistent with the same value.
4.1.2 Check the print-head status , which requires the correct color correspondence, all
nozzles normal inking, sharp line edges, no flying ink, linear line and not dotted.