AS-Interface Analog Module
General Information
Subject to reasonable modifications due to technical advances
Copyright Bihl+Wiedemann, Printed in Germany
Bihl+Wiedemann GmbH · D-68199 Mannheim · Phone +49-621-339960 · Fax +49-621-3392239 · Internet http://www.bihl-wiedemann.de
is
sue da
te
20
.1
.2
0
0
4
8
3
General Information
This operating instruction holds for the following devices of the Bihl+Wiedemann
GmbH:
With the new AS-Interface specification it is possible to transmit analog values via
AS-Interface as simple as binary signals. For these reasons the new AS-Interface
slave profiles 7.3 and 7.4 for the transmission of analog values have been defined.
According to the profil 7.3 the AS-Interface master puts the analog slaves into ope-
ration in the same way as the digital slaves and startes the data exchange auto-
matically. The host system (PC, PLC, Fieldbus) can read the 16 bit value directly
out of the AS-Interface master. The analog value transmission between AS-Inter-
face master and AS-Interface slave is done invisibely for the user.
The user's advantages are obvious. He does not have to pay attention to the hand-
ling of the data transmission. This means in the majority of applications that the
transmission time of analog values via AS-Interface will be reduced because the
transmission time depends on the AS-Interface cycle time and not as it was before
on the cycle time of the PLC program.
Bihl+Wiedemann has developed AS-Interface analog modules for safe and direct
connection of sensors and actuators according to the new standardized Profile
7.3.
Analog data such as pressure and room temperature is transmitted by the module
in interference-free digital signal form. In factory applications the module is instal-
led as with isolation amplifier or real power transformer. They are simply clambed
onto the AS-Interface cable and directly supported by the AS-Interface master:
Simply Plug and Play! There is no need to program a function block to transmit the
AS-Interface analog value via AS-Interface.
Article
Type
Channels
In-
puts
Out-
puts
AS-Interface
Profile
Galv.
sep.
Housing
L * W * H [mm]
Protection
class
Contakt
AS-Inteface
Contact-
Analog side
ID1 ID ID2 IO
1364
4 - 20 mA
4
4
"7.3"
X
105 * 22.5 * 114
IP20
Combicon
Combicon
F
3
E
7
1365
0 - 10 V
4
4
"7.3"
X
105 * 22.5 * 114
IP20
Combicon
Combicon
F
3
E
7
1366
0 - 20 mA
4
4
"7.3"
X
105 * 22.5 * 114
IP20
Combicon
Combicon
F
3
6
7
1367
0 - 10 V
4
4
"7.3"
X
105 * 22.5 * 114
IP20
Combicon
Combicon
F
3
6
7
1368
PT100
4
4
"7.3"
X
105 * 22.5 * 114
IP20
Combicon
Combicon
F
3
E
7
1232
4 - 20 mA
2
2
"7.3"
90 * 80 * 70
IP65
Piercing con. PG + Cage clamps F
3
D
7
1233
0 - 10 V
2
2
"7.3"
90 * 80 * 70
IP65
Piercing con. PG + Cage clamps F
3
D
7
1234
0 - 20 mA
2
2
"7.3"
90 * 80 * 70
IP65
Piercing con. PG + Cage clamps F
3
5
7
1235
0 - 10 V
2
2
"7.3"
90 * 80 * 70
IP65
Piercing con. PG + Cage clamps F
3
5
7
1254
PT100
4
4
"7.3"
90 * 80 * 70
IP65
Piercing con. PG + Cage clamps F
3
E
7
1345
4-20mA/0-10V
2
2
"7.3"
99 * 22.5 * 92
IP20
Combicon
Combicon
F
3
D
7
1412
0-20mA/0-10V
2
2
"7.3"
99 * 22.5 * 92
IP20
Combicon
Combicon
F
3
5
7
1359
4 - 20 mA
4
4
"7.3"
X
90 * 80 * 46,9
IP65
Piercing con.
M12
F
3
E
7
1360
0 - 10 V
4
4
"7.3"
X
90 * 80 * 46,9
IP65
Piercing con.
M12
F
3
E
7
1361
0 - 20 mA
4
4
"7.3"
X
90 * 80 * 46,9
IP65
Piercing con.
M12
F
3
6
7
1362
0 - 10 V
4
4
"7.3"
X
90 * 80 * 46,9
IP65
Piercing con.
M12
F
3
6
7
1363
PT100
4
4
"7.3"
X
90 * 80 * 46,9
IP65
Piercing con.
M12
F
3
E
7
