BigLeague LAWNS CheckMate Lawn Striping Kit Installation Manual Download Page 1

1125 Mac Tech Dr C

                

    Lansing, MI  48906

800.411.0150

www.bigleaguelawns.com

CheckMate™ Lawn Striping Kit For Toro Hydro & Gear Drive 

Commercial Walk Behind Installation Guide 

Important 

Big League Lawns, LLC warrants their products to be free of defects in material and workmanship.  
This warranty does not cover defects due directly or indirectly to misuse, abuse, normal wear and tear, 
failure to properly maintain the product or used for a purpose other than that for which it is intended.  
The duration of this warranty is expressly limited to one year parts and labor beginning from the date 
of delivery to the original customer. 

The obligation of Big League Lawns, LLC is limited solely to the repair or replacement, at our option, 
at its factory or authorized repair agent of any part that should prove deficient.  Purchaser must 
maintain the product under normal operating conditions at all times.  Prior to operation, become 
familiar with the attachment and any disconnect features.  This product is not intended to be used in a 
transport position or to be backed over curbs.  When not in use, the product should be removed from 
the mower and transported in a safe manner.  Failure to follow these instructions will void the 
warranty.

Summary of Contents for CheckMate Lawn Striping Kit

Page 1: ...nty is expressly limited to one year parts and labor beginning from the date of delivery to the original customer The obligation of Big League Lawns LLC is limited solely to the repair or replacement at our option at its factory or authorized repair agent of any part that should prove deficient Purchaser must maintain the product under normal operating conditions at all times Prior to operation be...

Page 2: ...teps away from creating a beautifully patterned lawn using your new CheckMate lawn striping roller To ensure a long life of both your mower and roller please be sure to follow the mounting recommendations below Tools Required Step 1 Identify Drilling Location Shown Below 9 16 Wrench 3 4 Wrench 1 4 Allen Wrench 3 8 Drill Bit Drill Belt Drive Hydro Drive ...

Page 3: ...ur mounting hole Note very little pressure should be applied to the drill Simply allow the bit to slowly drill the hole Step 3 Installing Mounting Arms Install Mounting Arm Align your mounting arm through the mounting hole On the underside thread the 3 8 nylon locknut onto the exposed threads of the mounting bolt ...

Page 4: ... channel Re insert the bolt with split lock washer through the L shaped bracket and thread into the channel nut inside channel Before tightening bolts all the way down center roller behind the mower After centering the roller use a 3 4 wrench to firmly tighten each mounting arm to the striping roller Final Steps Check installation pick up the roller to confirm it freely pivots up and down Installa...

Reviews: