20
PLACING LOADS
1.
Drive the vehicle carefully up to
the storage location (4,
).
2.
Press the lift button (1) until pick
tray (3) reaches the desired
height.
Ensure storage location is suit-
able for storing the load (size
and capacity).
3.
Move the load from tray (3) to
storage location (4).
4.
Press the lower button (2) until
the platform is completely low-
ered.
OVERHEAD MAINTENANCE
When performing overhead mainte-
nance, please ensure there are no
obstacles, beams or other obstruc-
tions before elevating lift. Always fully
lower the platform before moving to
the next maintenance position.
Ensure a safe work environment
before proceeding with maintenance
and never operate the lift outside.
PARKING
When leaving the vehicle, it must be
securely parked even for a short time.
1.
Park the vehicle in its designated
parking area.
Do not park the vehicle on a
slope. The platform must be
completely lowered.
2.
Lower the platform completely.
3.
Set the emergency power discon-
nect switch to apply the brake.
4.
Turn keyswitch to off position.
Remove key for added security.
5.
Pull out battery disconnect.
MOVING A DISABLED VEHICLE
Do not attempt to move a disabled
vehicle; notify your supervisor or
proper authority.
WARNING:
WARNING:
Summary of Contents for Joey J1 Series
Page 2: ......
Page 10: ...10 Figure 3 Sample of Operator Check List R7033...
Page 24: ...Big Lift LLC...
