Big Dutchman Dry Rapid DR 1500, Mounting And Operating Instructions

Page: 44 / 185

Page 34
Feed supply
DR 1500
Edition: 08/10 M 4021 GB
8 Feed supply
8.1 Silo extraction
Figure 8-1: Example of a direct silo extraction
8.2 Transfer FlexVey to Dry Rapid
Mount the transfer unit to the drive unit of the BD Flex Vey by means of the tension ring
(pos. 6).
For the attachment of the sensor a sleeve socket (code no. 25-60-3100) has to be
mounted between the drive and the transfer.
The conveying capacity is reduced because of returning feed. The
ascending gradient of the conveyor pipe should therefore be as small as
possible - max. 45°, better 30°.
max. 45°