Basic instructions
Page 3
AirMaster EM50
Edition: 03/2015 M 2341 GB
1.4.2 Safety symbols in the manual and on the installation
These safety symbols illustrate remaining dangers when handling the system. They are
supplements to the above-mentioned symbols:
1.4.3 Safety symbols and notes on your installation
Depending on the type of installation you will find the following safety symbols. They
indicate technically remaining dangers when handling the system and give information
on how to avoid these dangers.
Warning against dangerous electrical voltage
Warning against the cold
Warning against slippery surface
GENERAL DANGER!
Installation automatically starts working. Before starting repair,
maintenance or cleaning work, put main switch to ”OFF”.
Danger of bruising due to rotating machine parts!
Close protective devices each time before taking the system
into operation. Opening protective devices is only allowed
when the system is in a standstill and by authorised persons.
RISK OF INJURY due to operating auger, chain or cable
discs!
Never reach into or climb into a feed container or trough while
the motor is running.
