Bifinett KH 1106, Operating Instructions Manual

Page: 13 / 196

- 11 -
Interrupting processes (Cancel/Stop)
You can stop a process, interrupt it and then conti-
nue.
Interrupting the cooking process
Press button i „Cancel/Stop“ once to interrupt
a cooking process. The appliance interrupts the coo-
king process and stops the remaining time.
Press button
s „Start/quick start“, to continue the
cooking process.
Abort the cooking process
Press button i „Cancel/Stop“ twice to abort a
cooking process. The appliance switches back to
standby mode.
Prolong/shorten the cooking time
To increase/decrease the cooking time during
cooking, turn the dial
a
:
• turn clockwise and the cooking time is increa-
sed by one minute.
• turn anti-clockwise and the cooking time is de-
creased by one minute.
In order to increase the cooking time by 30 seconds
at a time, press button
s „Start/quick start“.
Note: In standby mode and during defrosting,
the time cannot be altered by means of the
dial.
Quick start function
With this function you can immediately for 30 se-
conds (or longer, up to 95 minutes) begin cooking
at 100 % power.
•
Press button s „Start/quick start“. In the LED
display the symbols for microwave operation
and cooking flash . The count down
begins.
Memory function
Use the memory function, if you wish to carry out
3 processes after one another. If you choose several
operations and one of them includes defrosting, de-
frosting must be set as the first in the sequence.
After finishing a process, the acoustic signal sounds
once, then the next process immediately starts
Example
You require 300 watts for 15 minutes.
Use microwave power for defr 10 minutes
at 600 watts microwave power for c
10 minutes grilling for the preparation of food.
1. Press button p „Memory“ once. „3-1“ is
displayed in the LED display.
2. Press button o „Microwave“ six time to set
300 watts power for defrosting. „P300“ is
displayed in the LED display.
3. Turn the dial
a
to set the cooking time (durati-
on). Set 15:00 at 300 w power.
4. Press button p „Memory“ once again. Now
„3-2“ is displayed in the LED display.
5. Press button o „Microwave“ three times, to set
600 watts power. „P600“ is displayed in the
LED display.
6. Turn the dial a to set the cooking time (durati-
on: 10:00) at 600 w power.
7. Press button p „Memory“. „3-3“ is displayed
in the LED display.
8. Press button z „Grill/Combi“ once to set the
grilling function. „G-1“ is displayed in the LED
display.
9. Turn the dial
a
to set the grilling time (durati-
on: 10:00).
10. Press button s „Start/quick start“, to activate
the pre-setting function.
Selecting pre-settings
With this program you can pre-program a certain
starting time for cooking or grilling food.
If you have correctly adjusted the settings, the
appliance will automatically start at the set time.
IB_KH1106_E23715_GB 14.07.2008 14:05 Uhr Seite 11