5
The operating panel
Figure D:
Buttons and LEDs for the
number of cups
Button for setting the “Hours” (h)
Clock
Button for setting the “Minutes”
(min)
Auto. button and LED
Program button
Switching off and clearing settings
(off)
Installation and connection
➪
Always place the coffee machine
on a flat, even surface.
➪
When you want to connect up the
coffee machine, pull out the power
cord from its holder (Figure B).
➪
Plug in the power cord.
Before initial use
➪
Open the glass jug (Figure A;
+
) and the water container.
➪
Carefully rinse out the water contai-
ner and glass jug with tap water.
➪
Fill the glass jug with 1.4 litres of
tap water.
➪
Empty the jug into the water con-
tainer.
➪
Place the empty glass jug on the
hot plate (Figure A;
).
➪
Select the required number of cups
“2-4”.
The corresponding LED illuminates and
the brewing process begins.
➪
When the brewing process has
finished, empty the glass jug.
➪
Press the “off” button
(Figure D;
), until the LED for the
number of cups extinguishes.
You can now use your coffee machine.
Setting the time
➪
Press the “h” and “min” buttons
repeatedly
(Figure D;
‚ until
), you reach
the desired time.
➪
Now briefly press the “prog” button
(Figure D;
).
The two vertical dots in the display
flash. The clock is working.
Preparing the coffee
When configuring all settings on the
control panel (Figure A;
) apart from
setting the clock and programming the
machine to start brewing, you will hear
a beep when you have correctly pres-
sed a button. At the end of the
brewing process, a LED flashes and
you will hear four beeps. Do not remo-
ve the jug until the beeps finish.
Filling with ground coffee
➪
Push the filter holder release
(Figure C).
The filter holder swivels out to the side
(Figure C).
➪
Place an opened, size 4 filter into
the filter holder.
➪
Pour ground coffee into the filter bag.
KH1_IB_Content_UK.qxd 26.10.2004 8:43 Uhr Seite 5