1
Installation, Operation and Maintenance Manual
MAN 564 Rev. 6
June 2020
General Warnings
Section 1: General Warnings
NOTICE
Biffi Italia s.r.l. pays the highest attention to collecting and verifying the documentation
contained in this user manual. However Biffi Italia s.r.l. is not liable for any mistakes
contained in this manual, for damage or accidents due to the use of the latter. The
information contained is of exclusive reserved ownership of Biffi Italia s.r.l. and may be
modified without prior notice. All rights reserved.
Section 1: General Warnings
NOTICE
The manual is an integral part of the machine, it should be carefully read before carrying
out any operation and it should be kept for future references.
1.1
Generalities
Biffi Italia s.r.l. actuators are conceived, manufactured and controlled according to the
Quality Control System in compliance with EN-ISO 9001 international regulation.
1.1.1
Applicable Regulation
EN ISO 12100:2010:
Safety of machinery – General principles for design –
Risk assessment and risk reduction
2006/42/EC:
Machine directive
2014/68/EU:
Directive for pressure PED equipment
2014/35/EU:
Directive for low voltage equipment
2014/30/EU:
Directive for the electromagnetic compatibility
2014/34/EU:
Directive and safety instructions for use in hazardous area
1.1.2
Terms and Conditions
Biffi Italia s.r.l. guarantees that all the items produced are free of defects in workmanship
and manufacturing materials and meet relevant current specifications, provided they
are installed, used and serviced according to the instructions contained in the present
manual. The warranty can last either one year from the date of installation by the initial
user of the product, or eighteen months from the date of shipment to the initial user,
depending on which event occurs first. All detailed warranty conditions are specified in
the documentation forwarded together with the product. This warranty does not cover
special products or components not warranted by subcontractors, or materials that were
used or installed improperly or were modified or repaired by unauthorized staff. In the
event that a fault condition be caused by improper installation, maintenance or use, or by
irregular working conditions, the repairs will be charged according to applicable fees.
The warranty and Biffi Italia s.r.l. liability shall lapse in the event that any modification
or tampering whatsoever be performed on the actuator.
