Biddle SensAir, Manual

Page: 80 / 208

M
AINTENANCE
C
OMFORT
A
IR
C
URTAIN
en-80
en
5.2.2 Removing the filter
For free-hanging models
1. Remove the grille from the inlet grate:
- Slide the grille upward.
- Tilt the grille upwards a little.
- Remove the grille from the grate.
2. Clean or replace the filter.
3. Replace the grille in the inlet grate.
Caution:
c
Place the grille in the correct position in the inlet
grate. When doing so, pay attention to the direction
of the fins.
With recessed and cassette models
1. Open the inlet grille:
- Push the two electrodes
1
towards one another – the
grille will tilt down.
2. Slide the filter out of the grille.
3. Clean or replace the filter.
4. Replace the grille in the inlet grate.
5.3 Cleaning the unit
You can clean the exterior of the unit with a damp cloth and a
domestic cleaning agent. Do not use any solvents.
Caution:
c
Make sure that no water runs into the unit.