Biddle SensAir, Manual

Page: 64 / 208

O
PERATION
C
OMFORT
A
IR
C
URTAIN
en-64
en
74. IR sensor The unit is fitted with an IR sensor in the discharge grille. This
sensor measures the temperature at a section of the ground
near the door opening and can thus be used for various func-
tions:
• indoor temperature sensor (to be activated via 71. Indoor
temperature sensor )
• outdoor temperature sensor
• door contact switch
• quick start of the door contact switch (in the event of
detection of persons, already active for 10 seconds)
• activation of unit for 30 minutes (in the event of detection
of change)
Select which functions the IR sensor must be used for.
Possibly implement a correction to the indoor and outdoor
temperatures if the measured temperature deviates from the
actual temperature.
The room temperature that is adjustable by the user can be
limited. Set a minimum and a maximum room temperature.
3.7 Maintenance
The menu Maintenance contains information on the use of the
unit and offers a number of functions which are necessary for
remedying errors.
Status The status screen displays general information about the
installation and specific information per group and per unit
connected.
Current errors Gives an overview of current errors. The error messages can
also be deleted here.
Error history Gives an overview of the errors which have occurred.
Capacity test Use this function to test the capacity of the unit and your
heating installation.
The unit will run for 30 minutes at the highest fan speed and
the highest heating capacity. You can check the discharge tem-
perature and the heating capacity per metre of unit length.
The discharge temperature is limited to 50°C.