Biddle SensAir, Manual

Page: 55 / 208

S
ENS
A
IR
M
ANUAL
O
PERATION
Manual version 1.0- North America (13-09-2016) en-55
en
9. Calibration An unfavourable positioning of the room sensor or use of the
temperature sensor in the unit may be the reason why the
temperature displayed deviates from the actual temperature.
Use this function to adjust the temperature reading.
3.6 Configuration
The menu Configuration allows you to enter settings in order
to adjust the operation of the unit to the room and the sys-
tem. Usually, this menu is used only for installation, mainte-
nance and service purposes.
20. Access control Pin code
Access to the entire control panel or to the menu alone can
be protected with a four-digit PIN code.
The default PIN code is 0000.
Note:
n
The cut-out only starts to operate when the control
panel has to be activated again. This means you
should wait a while until the screen turns black.
Access level
The control panel can be safeguarded at different access levels.
21. User interface options Display on/off button
The unit can be switched ON and OFF manually. This can also
be done via the internal timer or via an external release signal
on the unit. In this case you can disable the manual on/off
option. The on/off button is then not displayed on the Home
screen.
Temperature display
By default, the room temperature is displayed. With this func-
tion, you can select another temperature to display or switch
off the temperature display.
If the temperature display is switched off, there is no tempera-
ture control.