Biddle SensAir, Manual

Page: 44 / 208

I
NSTALLATION
C
OMFORT
A
IR
C
URTAIN
en-44
en
The correct strength is dependent on the door situation:
• Sliding door: Directly downwards.
• Single door: Directly downwards.
• Double door: In the direction of the door which is most
used.
Caution:
c
With a double door, do not aim the IR sensor
directly downwards. If you do so, then the outdoor
temperature will not be properly measured.
2.11 Switching on and checking operation
For all models:
1. Check the following connections:
- power supply;
- control cable(s) between control panel and unit(s);
-
If applicable:
external control components.
For models connected to a Daikin system:
1. Check the control cables between unit(s) and Daikin com-
ponents.
2. Switch on the Daikin indoor units and outdoor unit.
3. Test the Daikin system in accordance with the Installation
manual for the outdoor unit.
For all models:
1. Switch the mains supply onand/or put the plug into the
power socket for all connected units.
Caution:
c
Make sure that the unit’s power supply voltage
matches the local mains voltage.
The unit’s power supply voltage is displayed on the
type plate.
2. Place the control panel back into the wall holder.