I
NSTALLATION
C
OMFORT
C
IRCLE
22
2.12
Adjusting the discharge pattern
The discharge pattern can be adjusted to the room using the
supplied blind plates.
Caution:
c
If use is made of the air connection for an adjoining room,
the two blind plates must be mounted in the two holes on
the side of this connection.
Caution:
c
Do not mount more than two blind plates per unit.
1. Remove the air inlet grille
1
.
2. Place the blind plate into the desired hole, and fix it with
the supplied screws
2
.
3. Replace the air inlet grille.
1
2
3
