4
5. Warnings
Read the manual carefully before starting and retain for future
reference.
Prior to starting installation or any maintenance the pump
must be disconnected from the power supply and pressure
relieved from the system including controller, pump and
associated pipework.
Any changes or modification to the wiring must be carried out
by suitably qualified personnel.
A qualified electrician should correctly size and install circuit
breakers to protect the power supply. The fitment of additional
surge protection is recommended.
Never open the controller cover or pump terminal box cover
while controller is connected to electrical supply.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of
the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play
with the appliance.
To avoid excessive thermal shock to the motor the pump
should not start more than 20 times in any one hour period.
Ensure that the installation will comply with all applicable local
regulations.