page 24
Installation and Operation Guide
Qt X Sound Masking System
ACCESSORIES
Qt X Controller Accessories
Rack Mount Kit
(Qt X RMT-KT)
– allows a Qt X 300 or 600 to be mounted
to a rack. See instruction to change from a wall mount (Qt X 300/600).
Plenum Mount Kit
(Qt X PLMT-KT)
– allows a Qt X 300 or 600 to be
mounted in a plenum space and includes the mounting brackets. See
Plenum Bracket instruction to change from other mounting options.
Qt Active Emitter Accessories
Power Supply
(PS-AE-3) – has 3 outputs and can provide power for 1-3
PI-AE power injectors
Power Injector
(PI-AE) – has 2 channel outputs - each channel will
power up to 25 Qt Active Emitters in a single run
Emitter Mounting options
Universal Bracket
(AE-UB-W, AE-UB-B) – Mount the Qt Active or
Passive emitter to a wall or ceiling
Beam Bracket
(AE-BB-W, AE-BB-B) – Mount the Qt Active or Passive
emitter to exposed I-beams or trusses
Pendant Mount
(PM-W, PM-B) – Suspend Qt Active or Passive emitters
at an optimum height in open or raised ceiling spaces.
Drywall Mount
(DM) – Mounting bracket for Qt Active or Passive emitters
in drywall ceilings
Drywall Rough-in Bracket
(DRB-1) – Install before drywall ceiling is
hung. (DRB-1 Kit includes the Drywall Mount)
Ceiling Conduit Mount (4-pack)
(CCM-1) – For mounting the emitter
into acoustic ceiling tile or drywall in regions with special fire and/or
conduit requirements. Ceiling tile and drywall mounting rails included.
Compatible with both Qt Active and Passive emitters.
