A r c h i t e c t u r a l L o u d s p e a k e r
T H E R A D I A S E R I E S
p
l
a
n
a
r
t
e
c
h
n
o
l
o
g
y
R-600
T h e P o w e r o f C l a r i t y
radia
S
E
R
I
E
S
The new Radia R-600
by BG represents the finest technology ever created in an
architectural loudspeaker. Consistent with its highly regarded sibling the R-800, the new
R-600 delivers extremely high levels of sensitivity, output and accuracy with performance
that rivals the finest freestanding loudspeakers. Ideally suited for either lifelike home
theater or critical music listening, the R-600 is intended for use as a left/right in-wall
loudspeaker. A three-way passive design based on BG’s signature line array concept, the
R-600 provides controlled vertical directivity with wide horizontal dispersion for smooth
coverage throughout the listening area.
At the heart of the R-600 is an array of four Neo10s showcased in a solid, aluminum baffle,
grained and anodized in rich black. The Neo10 is a patent-pending 10” x 5” Planar Ribbon
Midrange Driver based on the company’s proprietary technology. Significantly larger in
size than other BG ribbons, the Neo10 sets new standards for sensitivity, output, power
handling and accuracy. In fact, the driver’s size allows it to move substantial amounts of air
while keeping diaphragm excursion at relatively low levels. Controlled excursion translates
into lower distortion and higher sensitivity while providing amazing clarity and linear
response.
Complementing the Neo10 array, and positioned to the side, are twelve patented Neo3
Planar Ribbon Tweeters, operating from 1.5 kHz to 20 kHz. Each tweeter is loaded into a
deep chamber that effectively absorbs all energy radiated to the rear. The R-600’s low
frequency section is comprised of two long-throw, high power dual-gap woofers. Each
woofer utilizes a 2” voice coil, paper/Kevlar
™
composite cone and an oversized magnet.
These high quality components, combined with dual-gap topology, deliver extraordinary
output and linear response with extremely low distortion.
