Chapter 4. Door Station Installation
IP Video Door Station DS06M(P) Installation User Manual
13
4.3. Door Station Mounting
Follow the steps below:
Step 1
: take the bracket plate (
Pic. 4.2
). Choose the right height of mounting above the
floor. The recommended height is about 1.5 m.
Step 2
: mark the holes on the mounting surface using the bracket plate as a template. Drill
the holes.
Pic. 4.2
Step 3
: insert plastic wall dowels in the holes and fix the bracket plate using four screws.
The heads of some other screws you use (not from the package contents) must be not higher than
2.5 mm and not bigger than 9 mm in diameter.
Step 4
: there are hidden and open ways of cabling:
for hidden cabling drill a hole for twisted pair cable output at the distance of 25 mm from
the bottom of the bracket plate. Leave 110 mm of the cable outside.
for open cabling fix a cable channel on the wall so that the distance between the
channel and the bottom of the bracket plate would be 36 mm. Leave 110 mm of the
cable outside (
Pic. 4.3
).