Chapter 3. Overview
IP Converter DK103M Installation User Manual
6
Chapter 3. Overview
3.1. IP converter
The front view of the IP converter is given below:
Pic. 3.1
1
– Reset button
: press this button 3 times with intervals not less than 1 second during 10
seconds to set device settings by default.
2
– Micro SD
: slot for mounting a MicroSD memory card (up to 32 Gb).
3
– Ethernet
: RJ45 socket for connecting the device to Ethernet
4
– DC 12V
: socket for connecting a DC 12V power supply (power equal or more than
12W)
5
– Power indicator
: If the device is activated, the red light is ON.
6
– Multiuser Unit socket
: used for connecting multi-user wired matrix videointercoms.
7
– Outdoor Unit socket
: used for connecting single-user analog videointercoms.
8
–
Monitor socket
: used for connecting monitors of single-user analog videointercoms.
Prior to using the IP converter, the monitors are connected directly to their analog videointercoms.
9
– RS-485 socket
: used for attaching extension controllers
Pic. 3.2