BeWAN Wi-Fi AP54
18
"System" tab
Modification of administration password
The network administrator can change the password allowing access to the configuration of the
BeWAN Wi-Fi AP54. In the factory settings, as seen previously, this parameter is as follows:
•
Password:
admin
For security reasons, we strongly recommend that you change your administration password. To
modify this parameter, you should proceed as follows:
1. In the first section, enter the new password of your choice.
2. Confirm this password by re-entering it in the section below.
Caution:
•
Choose a password you will remember easily. If you forget it, you will no longer be able to
access your settings. You will then have to “reset” the device by pressing the button on the
back of the BeWAN Wi-Fi AP54, thus losing all the elements of your current configuration.
•
When you enter your administrator login details, it is important to respect the correct case
used (capitals/lower case).
Summary of Contents for AP54
Page 1: ......