Beurer MG 850, Instructions For Use Manual

Page: 31 / 148

31
Treatment without massage oil: (recommended if you have no
or little body hair)
A massage treatment without massage oil provides a surface massage. This mas-
sage treatment activates the reflex zones and treats the surface of the tissue.
Treatment with massage oil: (recommended if you have thick
body hair or if you would like a deep massage)
If you opt for massage oils, the massage will penetrate deep into the tissue. This
will strongly promote your circulation.
IMPORTANT
Only use plant-based oils as other oils may stain or damage the wood surface
of the Fascia-ReleaZer
®
.
1. Put a couple of drops of plant-based oil in the palm of your hand.
2. After the massage treatment, wipe the wood surface of the Fascia-ReleaZer®,
the attachments and the treated area of the body with a towel
3. After the massage treatment, wipe the wood surface on the Fascia-ReleaZer®
and the treated area with a cloth.
The amount of oil to be used depends on the effect you wish to achieve. More oil
causes a faster movement and therefore a more intensive reflex action and circu-
lation of blood to the skin.
Less oil causes a slower treatment that penetrates deeper, with a very relaxing
effect that loosens the tissue.
It is also possible to combine the two. To do so, apply a larger amount of oil onto
the area to be treated and move the Fascia-ReleaZer
®
over the area quickly. Then
wipe off some of the oil with a cloth and treat the same area again, but this time
with slow movements.