Beurer EM34, Instruction Manual

Page: 11 / 52

11
Treatment is
uncomfort-
able
Power wire is
worn or malfunc-
tioning
Replace the power
wire
Electrodes are
worn or malfunc-
tioning
Replace the cuff
Intensity level set
too high
Lower intensity
level
Electrodes are not
wet enough
Shut off the de-
vice and remoisten
electrodes
Irregular
stimulation
Power wire mal-
functioning
Lower intensity
level and rotate the
power wire plug
90°. If problem
persists, replace
the power wire
Stimulation
is ineffect-
ive
Electrodes pos-
itioned incorrectly
Remove elec-
trodes and repos-
ition, ensuring cuff
has sufficient skin
contact
The skin
turns red
and/or a
stabbing
pain occurs
The universal cuff
is not positioned
correctly on the
skin
Ensure that the
universal cuff sits
comfortably on the
skin and cannot
move
The universal cuff
is dirty
Clean the universal
cuff as described
in these ins- truc-
tions for use
One of the water
contact elec-
trodes has a
scratch
Replace the uni-
versal cuff
Water contact
electrodes are not
sufficiently moist
Switch off the de-
vice. Moisten elec-
trodes