2
4
3
www.beurer-gesundheitsratgeber.com
5
DANGER
1
Beurer GmbH • Söflinger Str. 218 • 89077 Ulm • Germany
6
WARNING
www.beurer.com • www.beurer-healthguide.com
2.
1.
WARNING
––
AFTER 45
5. Warnings and Precautions
10. Cleaning / Maintenance
11. Retention
2. Intended use
3. To get to know each other
4. Explanation of symbols
13. What to do in case of problems?
6. Device Description
1. Scope of delivery
8. Service
9. Assess measurement results
14. Specifications
15. Warranty/Service
SpO2
soft cloth dampened with medicinal alcohol.
GERMAN
Storage
%SpO2 ?PRbpm
%SpO2 PRbpm
ÿ NOT in the vicinity of flammable or explosive gas mixtures.
• Prolonged use of the pulse oximeter can cause pain in persons with circulatory disorders
function key
For speedy processing, please use our contact form on the website www.beurer.com under the heading 'Service'.
- Damage occurring on the transport route between the manufacturer and the customer or between the service center and the customer
2. Unsteady measurement
Tropfwasser
Critical area: Consult a doctor urgently
Indicator lights are
suddenly off
This guarantee only applies to products that the buyer has purchased as a consumer and uses exclusively for personal
purposes within the framework of domestic use.
7500–8850 m
• If this symbol ? appears on the display , it means that the measurement signal is unstable. The readings displayed are
invalid.
Your Beurer team
an abnormal hemoglobin occurrence is to be expected with a false measurement. This applies in particular to carbon
monoxide poisoning and methaemoglobin poisoning, which result, for example, from the administration of local
anesthetics or if there is a methaemoglobin reductase deficiency.
Pulse oximeter does not
turn on
<ÿ80
ÿ NOT on fingers with anatomical changes, edema, scars or burns.
1x lanyard, 1x belt pouch, 1x this instruction manual
Contact your dealer or customer service
ÿ NOT if the device or the application finger is wet.
3500–5800 m
Hg = battery contains mercury.
Subject to errors and changes
When oxygen flows through the lungs, it is bound by hemoglobin in red blood cells.
A pulse oximeter uses two frequencies of light (red and infrared) to determine the
percentage (%) of hemoglobin in the blood that is saturated with oxygen. This
percentage is called oxygen saturation (SpO2) . In addition to the SpO2 level, a pulse
oximeter also measures and displays the pulse rate.
No altitude sickness (usually)
Beurer GmbH, Söflinger Straße 218, D-89077 Ulm (hereinafter referred to as "Beurer") grants a guarantee for this product
under the following conditions and to the extent described below.
3. Appear on the screen
Warning and safety notices in
Warning on the risk of injury or danger to
your health
6. Pulswelle
pressed.
develop
The buyer then receives more detailed information on how to process the guarantee case, eg where to send the product free
of charge and which documents are required.
The measuring finger is not inserted
correctly in the pulse oximeter
3. Pulse rate
The pulse oximeter will automatically
turn off after 8 seconds if no signal is
received.
Batteries containing harmful substances are not included
Disposal according to electrical and
<ÿ70
• If you remove your finger from the pulse oximeter, the device switches off after approx. 8 seconds
Specifications are subject to change without notice for update reasons.
Pulse oximeter shows
frequency (PRbpm) may be incorrect or the measurement is not possible at all.
,
The display is defective
ÿ NOT on small children or infants.
Very common occurrence of altitude sickness,
The serial number can be found on the device or in the battery compartment.
1. Red and infrared light source
out of.
> 90
displayed
Note Chapter 5
Security notice on possible
2500-3500 m
Fingertip must have the following dimensions:
1x POÿ45 Pulsoximeter, 2x 1,5 V AAA Batterien sung
This product meets the requirements
A claim under the guarantee can only be considered if the buyer can present - a copy
of the invoice/purchase receipt and - the original product to Beurer or an authorized
Beurer partner.
The Perfusion Index (PI) can range from 0.3% to 20%. It varies depending on the patient, measurement site and physical
condition. A very low PI value can affect the measurement.
dispose of household waste
Place the measuring finger back into the
pulse oximeter.
Waste electronic devices EC Directive
(value in beats per minute)
Batteries are empty
provided, can result in increased electromagnetic interference emissions or reduced electromagnetic interference
immunity of the device and lead to incorrect operation.
ÿ NOT on fingers that are too thin and too small, such as those found in small children (width approx. < 10 mm, thickness
approx. < 5 mm).
Replace the batteries
99–94
• This device conforms to European standards EN60601-1 and ENEN60601-1-2 (compliance with CISPR, IEC 61000-4-2,
IEC 61000-4-3, IEC 61000-4-8) and is subject to special precautions regarding electromagnetic compatibility . Please
note that portable and mobile HF communications equipment can affect this device. You can request more detailed
information from the customer service address provided.
Measurement interruptions
or high reading
The reception LEDs are defective
ÿ NOT during an MRI or CT scan.
Adaptation mandatory
Readings will not
Arterial oxygen saturation
2. Red and infrared detector
Dispose of packaging in an environmentally
friendly manner
The following table for evaluating your measurement results does NOT apply to people with certain previous illnesses (e.g.
asthma, cardiac insufficiency, respiratory diseases) and for stays at altitudes over 1500 meters. If you have any pre-existing
conditions, always consult your doctor to evaluate your readings.
A low oxygen saturation value is mainly due to diseases (respiratory diseases, asthma, cardiac insufficiency, etc.).
displayed
Beurer guarantees the flawless functionality and completeness of this product.
covered in the case.
Damage to device/accessories
Width between 10-20mm
button. The pulse oximeter starts
measuring. Do not move during the
measurement process.
shows visible damage and the batteries are still sufficiently charged. If in doubt, do not use it and contact Beurer customer
service or an authorized dealer.
Permissible storage temperature and
humidity
will
displayed
Specifically excluded from this warranty are - wear and tear
resulting from normal use or consumption of the product;
The measured SpOÿ is too low (< 70%)
WEEE (Waste Electrical and Electro
nic Equipment)
4. Pulses
Immediate acute danger to life
93–90
alarm suppression
You can attach a lanyard to the device to make it easier to transport the pulse oximeter (e.g. on the go).
Batteries are not inserted correctly
ÿ NOT on patients who are restless at the application site (eg tremors).
Please dispose of the device in accordance with the WEEE (Waste Electrical and Electronic Equipment) directive. If
you have any questions, please contact the local authority responsible for disposal.
Insufficient blood flow to the
Store the pulse oximeter in a dry environment (relative humidity ÿ 93%). Excessive humidity can shorten the life of the
pulse oximeter or damage it. Store the pulse oximeter in a place where the ambient temperature is between -25°C and
70°C.
<ÿ90
1. Slide open the battery
compartment cover.
Hemoglobin (in percent)
displayed correctly
1. Slide the narrow end of the lanyard through the holder
as shown.
2. Insert the two supplied batteries
into the pulse oximeter as shown
(with the correct polarity).
Pulse rate (beats per
ÿ NOT during patient transport outside of a medical facility.
• The device is suitable for use in all environments specified in this user manual, including the domestic environment.
The following symptoms occur more frequently in people with a low oxygen saturation value: shortness of breath, heart rate
increase, loss of performance, nervousness and sweating. A chronic and known reduced oxygen saturation requires monitoring
by your pulse oximeter under medical supervision.
measurement process calmly.
The worldwide guarantee period is 5 years from the start of the purchase of the new, unused product by the buyer.
Thickness between 5-15mm
The PO 45 finger pulse oximeter is a non-invasive compact device for checking arterial oxygen saturation (SpO2) and heart
rate in adults, adolescents and children in hospitals, clinic-like facilities and in home care.
your readings after a few
seconds.
• Do not use any additional parts that are not recommended by the manufacturer or offered as accessories.
- accessories supplied with this product which wear out or become exhausted with normal use
Replace the batteries
Quelle: Hackett PH, Roach RC: High-Altitude Medicine. In: Auerbach PS (ed): Wilderness Medicine, 3rd edition; Mosby,
St.Louis, MO 1995; 1-37.
The used, completely discharged batteries are to be disposed of via the specially marked collection containers, the hazardous
waste collection points or via the electronics retailer. You are legally obliged to dispose of the batteries.
Reinsert the batteries
< 90
Messfingers
cardiac arrhythmias
Failure to observe the following instructions can cause personal injury or damage to property. Keep the instructions for use
and make them accessible to other users. Pass on these operating instructions if the device is passed on.
ÿ NOT during a blood pressure measurement on the arm side with cuff application.
ÿ NOT on fingers with nail polish, dirt or plaster bandages.
Batteries are empty
2. Tighten the other end of the lanyard through the loop of
the narrow end.
finger opening
An acutely reduced oxygen saturation, with or without accompanying symptoms, must be clarified immediately by a doctor, it
can be a life-threatening situation. The pulse oximeter is therefore particularly suitable for high-risk patients such as people
with heart disease and asthmatics, but also for athletes and healthy people who move at high altitudes (e.g. mountaineers,
skiers or sports pilots).
Minute)
~90
Contact your dealer or customer service
Follow the instructions
Keep your fingers, hand and body still
during the measurement.
Note on important information
Use the pulse oximeter
Carry out the measurement again. If
problem occurs several times and that
jumps
• To set your desired display format, briefly press the functions during operation
German law applies.
The red light receiving LED is defective Contact your dealer or
antennas) at least 30cm away from all parts of the device, including all cables included in the scope of delivery.
(e.g. batteries, rechargeable batteries, cuffs, seals, electrodes, lamps, attachments, inhaler accessories); - Products that
have been used, cleaned, stored or serviced improperly and/or contrary to the provisions of the operating instructions, as well
as products that have been opened, repaired or modified by the buyer or a service center not authorized by Beurer;
Infusions Index
Note: You will find these symbols on batteries containing harmful substances:
The pulse oximeter is defective
Substances.
• Adjustable display brightness (1 to 10)
Applied part type BF
• 7 display formats / low battery indicator / auto power off after 8 seconds if no signal received
We are pleased that you have chosen a product from our range. Our name stands for high quality and thoroughly tested
quality products in the areas of heat, weight, blood pressure, body temperature, pulse, gentle therapy, massage, beauty,
baby and air. Please read these instructions for use carefully, keep them for later use, make them accessible to other users
and follow the instructions.
Consult a doctor.
• Easy to use and easy to transport (also ideal for on the go)
5800-7500 m
lanyard holder
ÿ NOT if you are allergic to rubber products.
Altitude sickness, adaptation recommended
Contact your dealer or customer service
displayed
• Under no circumstances may you open or repair the device, as otherwise it cannot be guaranteed that it will function properly.
Failure to do so will void the warranty. For repairs, contact Beurer Customer Service or an authorized dealer.
The following symbols are used in the instructions for use, on the packaging and on the type plate of the device:
The device must be in perfect condition,
it is essential to consult a doctor.
1. Slide a finger into the finger hole
of the pulse oximeter as shown.
Keep your finger steady.
Measuring finger is too big or too small.
taste.
Non-observance can lead to a reduction in the performance characteristics of the device.
the customer service
If, during the guarantee period, this product proves to be incomplete or defective in terms of functionality in accordance
with the following provisions, Beurer will carry out a replacement delivery or repair free of charge in accordance with these
guarantee conditions.
- Products purchased as 2nd choice or used items;
Pb = battery contains lead,
Contact your dealer or customer service
1. Oxygen saturation (value in percent)
Protected against foreign objects
ÿ12.5 mm and against slanting
normal range
Turn the pulse oximeter back on with the
ON/OFF button.
Depressed area: doctor's consultation recommended
3. Close the battery compartment
cover again.
The table below informs you about the effects of different altitudes on the oxygen saturation value and their consequences
for the human organism. The following table does NOT apply to people with certain pre-existing conditions (e.g. asthma,
heart failure, respiratory diseases, etc.). Symptoms (e.g. hypoxia) can already occur at lower altitudes in persons with pre-
existing conditions.
With kind regards
Cd = battery contains cadmium,
• Compact and lightweight design
Manufacturer
strong light source (e.g. fluorescent
lamp or direct sunlight) is nearby
serial number
ments of the applicable European and
national directives.
Low battery indicator
Permissible operating temperature
and humidity
The Beurer PO 45 pulse oximeter is used for non-invasive measurement of arterial oxygen saturation (SpO2), heart rate
(PRbpm) and the perfusion index (PI). Oxygen saturation indicates the percentage of hemoglobin in arterial blood that is
loaded with oxygen. It is therefore an important parameter for assessing respiratory function.
Severe hypoxia, only temporary stay possible
The infrared light receiving LED is
defective
Repairs or a complete replacement do not extend the warranty period under any circumstances.
1500–2500 m
Keep the pulse oximeter away from strong
light sources.
5. Perfusion Index (value in percent)
2. Press on the functions
• To set your desired display brightness, hold the function button longer during operation
- Consequential damage based on a defect in this product (in this case, however, there may be claims based on product
liability or other mandatory statutory liability provisions).
98 65
Source: Based on “Windisch W et al. S2k guideline: Non-invasive and invasive
ventilation as therapy for chronic respiratory insufficiency Revision 2017; Pneumology
2017; 71: 722795"
measurement method
Weight
Permissible
operating conditions
2 AAA alkaline batteries enable approx. 2 years of operation with 1 measurement per
day (each 60 seconds).
(oxygen saturation) in %
consequences for humans
Response time of the device The time to calculate new measured values is 8 seconds.
Possible Cause
+5 °C to +40 °C, 15-93% relative humidity, 70-106 kPa ambient pressure
fix
"Error 6" will appear on the
SpOÿ (oxygen saturation): 70-100%, Pulse :
30-250 bpm, PI: 0.3-20%
Approx. 57 g (including batteries)
"Error 7" will appear on the
power supply
The guarantee also applies without prejudice to mandatory statutory liability regulations.
AAA batteries
"Finger out" is shown
on the display
accuracy
PI%
"Error 3" will appear on the
%SpOÿ
PI: 0,3ÿ% – 1ÿ%; ±0.2 digits; >1,1ÿ% ±20ÿ%
Sensor technology for
measuring SpOÿ
AFTER 45
Dimensions
Measurement result SpOÿ (oxygen saturation) in %
"Error 4" will be on the
Expected SpOÿ value
Do not use high pressure or ethylene oxide sterilization on the pulse oximeter! The device is not suitable for
sterilization.
2x 1,5 V
Problem
Non-invasive measurement of arterial oxygen saturation of hemoglobin, pulse rate
and perfusion index on the finger.
Permissible storage
conditions
L 59 mm x B 33 mm x H 33 mm
IP22, type BF applied part
Classification / Measures to be taken
The following warranty conditions do not affect the statutory warranty obligations of the seller from the
purchase contract with the buyer.
Red light (wavelength 660 nm ±3 nm, 3.2 mW);
Infrared (wavelength 905nm ±10nm, 2.4mW);
Silicon receiver diode
battery life
classification
measuring range
If the buyer would like to report a warranty claim, they should first contact Beurer Customer Service: Beurer
GmbH, Service Center Tel: +49 731 3989-144
PR bpm
SpOÿ (oxygen saturation): 70-100%, ±2%, Pulse:
30-250 bpm, ±2 bpm
Type
altitude
-25 °C to +70 °C, ÿ93% relative humidity, 70-106 kPa ambient pressure
Operating
7. Commissioning
to prevent possible battery leakage.
Otherwise, the performance of this device may be affected.
Infrared light from the pulse oximeter is harmful to the eyes.
• The pulse oximeter device is calibrated to display functional oxygen saturation.
• The operation of portable RF communications equipment (including peripherals such as antenna cables and external
antennas) should be maintained at least a 30 cm (12") separation distance from all parts of the PO 45.
–––
DANGER:
Dear Customer,
Features of the pulse oximeter
Assess perfusion index
7.1 Insert batteries
WARNING
device
Display format (7 different)
Display
DANGER:
7.2 Fasten the neck strap
Notes on Electromagnetic Compatibility
Failure to follow the instructions below can result in erroneous
measurements or measurement failure:
WARNING
Altitude dependent decrease in oxygen saturation
measurement failure can occur.
Finger, hand or body is in
motion
off automatically.
• The device complies with the EU directive for medical products 93/42/EEC, the Medical
Devices Act and the standard DIN EN ISO 80601-2-61 (medical electrical devices - special
specifications for the basic safety and the essential performance features of pulse oximeters
for medical Use).
a notice
a notice
a notice
width approx. > 20 mm, thickness approx. >15 mm)
shear results.
ÿ NOT on thick fingers that cannot be easily inserted into the device (fingertip:
IP22
12. Disposal
Pulsoximeter
• Two-color OLED display showing oxygen saturation (SpO2), pulse rate (PRbpm) and des
Infusion Index (PI)
to lead. Therefore, do not use the pulse oximeter on one finger for more than 30 minutes. This is
the only way to ensure correct sensor alignment and skin integrity.
21
PAP
• If people move during the measurement process. Hold hand, fingers and body during
• In order not to falsify the measurement result, there should be no strong light sources (eg fluorescent lamps or direct
sunlight) in the immediate vicinity of the pulse oximeter.
• People who have low blood pressure, suffer from jaundice, are taking drugs that cause vasoconstriction, or have low
blood pressure may experience erroneous or false readings.
• Check that all parts specified in the scope of delivery are included.
• Do not carry out any self-diagnosis or treatment based on the measurement results without consulting your doctor.
In particular, do not start a new medication on your own and do not make any changes to the type and/or dosage
of an existing medication.
• This device is not intended to be used by people (including children) with restricted physical, sensory or mental
abilities or lack of experience and/or knowledge, unless they are supervised by a person responsible for their
safety or received instructions from her on how to use the device. Children should be supervised to ensure they
do not play with the device.
• If the pulse oximeter display shows a low battery condition, replace the batteries
• Check the pulse oximeter regularly to ensure that the device is not used before use
• The pulse oximeter always shows an instantaneous reading, but cannot be used for continuous monitoring. • The
pulse oximeter does not have an alarm function and is therefore not suitable for medical evaluation
• The use of accessories other than those specified by the manufacturer of this device or
• If you will not be using the pulse oximeter for more than a month, remove both batteries from the device,
Never hold the pulse oximeter under water, otherwise liquid can penetrate and damage the pulse oximeter.
• After each use, clean the housing and the rubberized inner surface of the pulse oximeter with a
• In people with cardiac arrhythmias, readings of oxygen saturation (SpOÿ) and heart
• In patients who have received clinical dyes in the past and in patients with
• In patients with an arterial catheter, hypotension, severe vasoconstriction, anemia or hypothermia
• Protect the pulse oximeter from dust, shock, moisture, extreme temperatures and explosives
• Keep portable RF communications equipment (including peripherals such as antenna cables or external
• The device may only function to a limited extent in the presence of electromagnetic disturbances. As a result, error
messages or a failure of the display/device may occur.
• Do not look directly into the inside of the housing during the measurement process. The red light and the invisible
• The display of the pulse wave and the pulse column do not allow an estimation of the pulse or blood flow strength
at the measuring point, but only serve to display the current optical signal variation at the measuring point, but
they do not enable reliable pulse diagnostics.
• The functionality of the pulse oximeter may be impaired when using electrosurgical equipment or defibrillators.
• The use of this device adjacent to other devices or stacked with other devices should be avoided as it may result
in improper operation. If use of the prescribed type is nevertheless necessary, this device and the other devices
should be observed to ensure that they are working properly.
• Non-observance can lead to a reduction in the performance characteristics of the device.
• Pulse oximeter readings are too high in case of carbon monoxide poisoning.
• There should be no nail polish, artificial nails or other cosmetics on the measuring finger. •
When using the measuring finger, ensure that the fingernail is short enough for the fingertip to touch the sensor elements
Machine Translated by Google
