Beumer stretch hood S, Operating Instructions Manual, Page: 72 / 192

Operation BEUMER stretch hood® S
72 BA-6090103-EN
19.08.09
Parameters for the operating personnel
The upper parameter of the corresponding display is modified by pressing the
function keys which are assigned to (+) or (-). However, this parameter can also
be modified with a numeric input as all other parameters. The other displays of
this groups are selected by pressing the "Scroll up/scroll down" keys.
Parameters Function Note
032 Stretch carriages -
crimp film This parameter defines the position of
the stretch carriages for crimping the
film. The film must be slightly tensioned
on all sides.
034 Stretch sleds - crimp
film
This parameter defines the position of
the stretch sleds for crimping the film.
The film must be slightly tensioned on
all sides.
052 Correction value of the
hood length for standard
stretch The parameter value is added to the
measured package height. The result
corresponds to the hood length.
054 Correction value of the
hood length for high-
rack stretch The parameter value is added to the
measured package height. The result
corresponds to the hood length.
058 Crimp sleeve Once the film has been cut, the excess
film is pulled over the crimping bows.
060 Speed of stretch car-
riages during stretching This parameter defines the speed of the
stretch carriages when the film hood is
stretched.
062 Move back crimping
motors during stretching During the stretching process, the
crimping motors are moved back for a
short time once this position is reached.
064 Press on crimping mo-
tors during stretching The crimping motors, which have been
moved back for a short time during the
stretching process, are advanced once
this position is reached.
066 Speed of stretch sleds
during stretching This parameter defines the speed of the
stretch sleds when the film hood is
stretched.
070 Stretch carriages,
stretch position 1
This parameter defines the position of
the stretch carriages for pulling the film
hood over the package. Set the value so
as to prevent the crimping bows from
touching the package when they are
lowered.