Installation
BEUMER stretch hood® S
38
BA-6090103-EN
19.08.09
Maintenance platform
The hoist is connected to the platform parts and both supports. The mode of
installation depends on the place of installation and the available lifting equip-
ment. Another possibility is to pre-assemble the platform parts and then place
them on the hoist. The film releasing trestle and the stairs form a unit. The parts
are screwed to the hoist and the platform.
Before mounting the railing, the hood applicator head should be placed on the
platform.
1 Hoist
2 Support
3 Cross
bar
4 Spacer
How to mount the
maintenance platform
1. Set up both supports opposite the hoist.
2. Bolt both cross bars between the supports and the hoist.
3. Bolt both spacers between the cross bars.
4. Align the supports and the hoist and fasten them on the floor.