BLADE INSTALLATION
NOTE:
VIDEO LINK:
PLEASE WATCH VIDEO ON HOW TO INSTALL BLADES:
https://www.loom.com/share/fe75ca32839f4f548e48aab78b668783
1. When installing and handling fabric blinds, use clean, soft cotton gloves (or the gloves supplied) must be worn to avoid
marking the fabrics.
2. Check all blades for creasing, if any creasing has occurred, please use an iron on medium heat and iron out the creasing.
Iron the back of the blade. If unsure use baking paper to protect the fabric from overheating and melting.
See video below
3. Remove the fabric from its packaging on a flat surface (a clean floor is often best) Unroll fabric without altering the order of
folds.
4. Check all hangers are aligned and secured.
5. You will have two single blades marked Left and Right or four single blades if split or centre bunching has been ordered.
6. Install the blade that says ‘Hang First’ by hanging on the first carrier.
7. Make sure the first single blade you hang has a secure fabric loop as per the photo below and faces away from the track.
8. Take the first piece of fabric. Fold to form a pleat. Secure the fabric folds together by slightly bending and rocking the
hangers to ensure the teeth lock into position.
9. Take the second piece of fabric, fold to form a pleat. Secure the fabric folds together by slightly bending and rocking the
hangers to ensure the teeth lock into position.
