Beta Max MAXIAL TRACK HOIST, Use And Maintenance Instruction Manual

Page: 78 / 160

Use and Maintenance Instruction Manual
MAXIAL TRACK HOIST
REV. 2.2 (2017)
SAFETY REGULATIONS
Page | 7-11
7.6.5 Risks arising from incorrect assembly on the ground
The first components of the Ladder Track sections and anchors are assembled.
For this operation, all the documents pertaining to the configuration together with the Use
and Maintenance Instruction Manual of the machine must be consulted. Moreover, all the
necessary means must be employed for lifting and transporting the material in question.
Possible risks:
— errors in the assembly process
— assembly is not compliant with the authorization given
— falling material or equipment
— errors in the electrical connections
Prevention and safety measures:
— all personnel designated to the assembly process must be qualified and must be
perfectly aware of the procedures given in the Instruction Manual of the machine.
Particular attention is to be when positioning and fastening each component precisely
while carefully following the indications of the Instruction Manual
— during the installation process, exact correspondence must be verified between the
work carried out, the assembly layout given with the authorization and that of the
Instruction Manual
— personnel involved in the installation operations must constantly wear the safety hard
hat, safety shoes and work gloves. Nobody is to be allowed to stop beneath or pass
under the machine during the assembly process
— all electrical connections must be carried out exclusively by qualified personnel and
their functionality is to be verified before being used