6
HOW THE ROBOT WORKS
Replacement
Parts Number
1. Swivel head (with
side flap)
Including float, swivel
smoothening-ring &
bottom screw plate:
RC26ASM01/BWF
1.1. Sliding switch
---------
1.2. Power indicating
light
---------
1.3. Water sensors
---------
1.4. Charging port
---------
2. Side flap (with
side pin)
RC26-07/WHT
3. Swivel
smoothening-ring
RC35-08-004
4. Top cover
RC26ASM02/BWF
5. Swivel head
bottom screw
plate
RC30-05-005/BWF
6. Filter cover
RC26-09
7. Complete base
RC26-10/BWF
7.1. Grip (on swivel
head)
---------
7.2. Grip (underneath
the base at wider
end)
---------
8. Locking pin
RC26-10-015
9. Rear wheel (with
axle) x 2
RC26ASM03/BLK
10. Small wheel x 2
11. Front wheel
12. Suction mouth
flap
RC26ASM04/BWF
13. Draining filter flap
x 2
14. Float
RC26-15/BWF
15. Hook (with V-clip)
for Telescopic
pole)
RC30-16/WHT
16. Charging cable
RC30-17-001
17. Adaptor
RC30-17-002
The robot has a water-propelling nozzle at the bottom of the swivel head. Water is first
sucked in through the suction mouth at the bottom of the robot, which then goes through
the filter and is discharged via the propelling nozzle. Water jetting from the nozzle propels
the robot forward. Once the robot stops against an obstacle such as the pool wall, its side
flap sways and its swivel head turns 180
o
, allowing the robot to move in the opposite
direction. The robot moves in a generally straight pattern in one direction and in an arc
pattern in the other direction. The robot vacuums the pool bottom as it moves, collecting
debris in its compartment.
