BestScope International Limited
-
４
-
Condenser
screw
Condenser
installing ring
Condenser
2.3 The other specification
2.3.1 Mechanical tube length: 160mm
2.3.2 Conjugate distance: Infinity (Non- Infinity: 195mm)
2.3.3 Head: Seidentopf Binocular or Trinocular, Inclined 30°, Rotatable 360°, Anti-fungal
systems. Interpupillary Adjustable Distance Is 48-75mm, Diopter adjustable range ±5.
2.3.4 Nosepiece: Quadplex nosepiece
2.3.5 Mechanical stage: Size 145mm×140mm, X-Y travel 76mm×52mm
2.3.6 Focusing systems: Coaxial Coarse and Fine Focusing Knobs, Coarse stroke 26mm,
Fine division 2µm, Condenser up-down range 22mm
2.3.7 Condenser: Abbe condenser, N.A. 1.25, Adjustable aperture, Aperture center can be
adjustable.
2.3.8 Illumination: Non-spherical System
2.3.9 Filter: Built in blue filer
2.3.10 Electric components: Input voltage AC85-265V/LED AC170-270V, 50/60Hz
Output voltage DC1.2-6V/LED, DC0.4-3.5V 6V/20W halogen lamp
Rotation potentiometer with power switch,
Fuse 2A ф5×20
3.
Installation
Please clean the operation desk before installation. Put
out the microscope of the carton and put it on the desk.
Make sure the supply voltage meets the instrument’s
requirement and the power switch is off.
Installation Instruction Fig.:
1.
Turn the binocular (trinocular) head to working
position;
2.
Put out the dust cover of the eyepiece tube;
3.
Insert into the eyepiece;
4.
Install Abbe Condenser
3.1 Eyepiece Tube:
Loose the Head Fixing Screw G, turn the tube to
observing position, then tighten the Screw G.
3.2 Put out the eyepiece dust cover.
3.3 Eyepiece
Put out the eyepiece of the carton, and insert it into the tube. Please don’t touch the lens of the
1
2
3
4
