Installation Instructions
Seat Covers, Rear Kit
Vehicle Application:
Jeep® Wrangler Unlimited 4-Door 2018-current
Part Number 29291
P1 - 29291 Rev. A 0119
Installation Instructions - Seat Covers, Rear Kit
© 2019 Bestop, Inc.
-OR-
Read and follow, precisely, all installation instructions provided when
installing this product. Failure to do so may result in a poor fit, and could
place occupants of the vehicle in a potentially dangerous situation.
To reduce the risk of accidental injury: Follow all vehicle Manufacturer’s and
Bestop® safety messages, application and installation instructions.
• Do not remove seats from the vehicle to install this product.
• Fit and maintain sides of seat cover as tight to seat as possible, always
matching front to side seam of seat with similar panels and seams of seat cover.
• Remove headrest carefully to avoid damaging manufacturer’s wiring.
Assure all plugs are connected after installation of seat cover.
• Do not use and replace if seat cover becomes damaged or wear no longer
allows a tight fit to seat sides.
WEAR SEAT BELTS AT ALL TIMES
Installation Time
Tools
Skill Level
Safety glasses should be worn at all
times when installing this product.
WARNING
CAUTION
Installation Tips
Care & Maintenance
2 - Moderately Difficult
1 hour
Safety
Glasses
Support
We’re here to help! Go to:
https://www.bestop.com
and click on
Need Help?
https://www.bestop.com/video-library
Your seat covers are machine washable. Wash separately in COLD water with
¼ of normal amount of soap. Hang dry.
