- 15 -
and
the Mobile
Phone Network Operator (MPNO),input the phone number and/or email
address you’d like the MMS pictures to be sent to. You can enter up to three
different phone numbers and/or email accounts.
Note: The Phone Number and Email must be filled in at least one of
them; other two Phone or Email can be left blank.
4.1.4 Click on
to choose the directory to save the settings, usually
under the root
directory of the SD card (You need to insert the SD card in the SD card reader
and plug it in your
computer.) Then, click on
. A file named setup.dat as following file
will be created and saved in the directory you just selected.
4.1.5 Alter the attribute of the setup.dat as “read-only”.
4.1.6 Take out the SD card then insert it into camera. Switch to the TEST
position.Check it whether set successfully or not (check method: open the MMS
setting in menu, check whether the receivers’ numbers have existed in the
camera or not.)
Notice: The operator data maybe changed sometimes,if the saved data
in setup software can not be updated in time, the mms would not be
sent successfully in auto setting. If this situation happened, please try
manual settings.
4.2 MMS Manual Setting
4.2.1 Enter the MMS Settings interface; Choose the manual Settings, as shown
in the picture follows (China mobile APN info is used as an example):
