BestCode Next 8 Series Technical Manual Download Page 67

Page: 67 / 305

BestCode Next Series 8 Technical Manual

October 2022

Page 53 of 290

Setup Screen

The setup screen is used for
setting up the machine
languages, date/time,
peripherals, networking,
and passwords.

Name

Give a unique name to the Printer. Often specific to the line the machine
is operating on.

Brightness

Brightness of the Touch Screen. Can be
increased or decreased by preference.

1-9

Measure

Selects Imperial or Metric measurement
units. Changes units used when calibrating
the width using the Speed Screen.

Imperial or Metric

Language

Selects the Language file to use on the Printer. Must press arrow to load.

Keyboard 1-4

Selects the Keyboard/s to be used for creating messages.

Up to 4 keyboards can be used. Press the Globe button
on any keyboard to change to the next Keyboard.

Date / Time

Date

Sets the date

Format

Sets the format that the date is displayed

Time

Sets the time

Week Start

Sets the day of the week to associate week codes to (I.E Sunday = 1, Monday =2, or Monday =1,
Tuesday = 2)

Summary of Contents for Next 8 Series


















































































































































































































































































































Search results

Summary of Contents for Next 8 Series

Reviews:

BestCode Next 8 Series, Technical Manual, Page: 67 / 305

Search results

Summary of Contents for Next 8 Series

Reviews: