BestCode Next 8 Series, Technical Manual, Page: 63 / 305

BestCode Next Series 8 Technical Manual October 2022 Page 49 of 290
Auto-Encoding Adjust Screen
The adjust screen automatically changes when using Single Sensor or Dual Sensor encoding modes ( Setup info Here )
Auto Encoder Print Enter the Auto Encoding Print Speed Screen.
Height
Increases or decreases the height of the
print by increasing or decreasing the
strength of the high voltage field in the
printhead.
0-10
Rotation
Rotates the direction that the print
appears on the product
Normal, Mirror, Flip, Mirror Flip
Bold
Each settings increases the width of the
selected field by adding more printed
drops. Makes darker print.
0-9
Speed
Fast Best Quality Fastest
Higher Speed, OK
Quality
Faster
Faster than Fast,
Good Quality
Ultra-Fast
Fastest Print,
Readable Code
Gap
Increases the space between characters
in the selected field.
0-9
Pitch
Specifies the delay between repeated
prints.
0-4,000,000,000