6
7
Minimum 1 1/4 in (32 mm)
Maximum 1 3/4 in (44 mm)
Put the bed back in its place.
Put the VB-1134 screws into the
holes of part #80 and screw the
bed onto the masonry wall until
tight against the wall. Screw must
be at least 1 1/4 in (32 mm) deep
into masonry.
USE AN ELECTRIC SCREWDRIVER
WITH AN ADJUSTABLE TENSION
CLUTCH THAT HELPS PREVENT
OVER-TIGHTENING AND STRIPPING.
Using a 5/32 in (4 mm) diameter masonry bit, drill into the drywall
and masonry (a hammer drill is required).
5
Move the bed again.
80
Wood
Wood
Drywall
Drywall
Masonry
Masonry
VB-1134
4 in (102 mm)
85183-3 AN
25
SERVICE: 1-888 8BESTAR (1-888 823-7827)
WALL ANCHORING INSTRUCTIONS
MASONRY
INSTALLATION RECOMMENDATIONS
