Best 7KC Series, Service Manual, Page: 31 / 41

Service and Maintenance
7KC Series Service Manual
3–9
2. Insert a flat blade screwdriver behind the plastic button retainer and
pry the button assembly from the locking bar, as shown in Figure
3.9 .
1. Align the button tab with the top slot in the sleeve, as shown in
Figure 3.10 .
Figure 3.9 Removing the button assembly
To reinstall the button assembly:
Inside of door
Insert screwdriver here.
Figure 3.10 Inserting the button assembly into the sleeve
Inside of door
Locking bar
Slot in sleeve
Button tab