
Service and Maintenance for Mortise Locks
W Series Service Manual
4–31
Task F. To remove the escutcheons (for J trim and M trim only):
1. Remove the upper and lower escutcheon screws.
Note:
The J escutcheon has only an upper escutcheon screw.
2. Remove the inside and outside escutcheons.
Task G. To remove the mounting plates:
1. Remove the two mounting plate screws from the inside of the door.
Save the screws.
2. Remove the outside and inside mounting plates.
3.
For J trim
, remove the J alignment plate.
Figure 4.30
Removing the escutcheons and mounting plates (M trim, RH door shown)
Inside of door
Outside of door
Mounting plate
screw
Inside mounting
plate
Mounting plate screw
Upper escutcheon screw
Lower escutcheon screw
Inside escutcheon
Outside escutcheon
Outside
mounting plate
Summary of Contents for 34HW
