BEST ACCESS SYSTEMS 34HW, Service Manual, Page: 75 / 228

Service and Maintenance for Mortise Locks
W Series Service Manual 4–21
Task G. To reinstall the inside and outside levers/knobs:
For both knobs and levers
1. Unscrew the inside spindle one full turn to allow the spindles to
turn freely.
For knobs
1. From the outside of the door, insert the outside knob and spindle
assembly into the lock.
2. Slide the inside knob onto the inside spindle and secure it with the
set screw.
3. Push the set screw cap into the set screw hole.
4. Tighten the upper and lower escutcheon screws.
5. Turn the knobs to check that they operate smoothly.
Figure 4.22 Reinstalling the knobs
Spindles
Set screw
Set screw
cap
Outside of door Inside of door