BEST ACCESS SYSTEMS 34HW, Service Manual, Page: 127 / 228

Service and Maintenance for Cylindrical Locks
W Series Service Manual 5–17
3. Turn the levers/knobs to check that they operate smoothly.
Task I. To reinstall the core and throw member:
1. Install the blocking plate onto the throw member.
Caution
You must use the blocking plate to prevent unauthorized access.
2. Insert the control key into the core and rotate the key 15 degrees to
the right.
3. Insert the throw member into the core.
Figure 5.18 Reinstalling the levers/knobs
Outside of door
Figure 5.19 Reinstalling the blocking plate and throw member
Core
Blocking plate
Throw member