BEST ACCESS SYSTEMS 34HW, Service Manual, Page: 116 / 228

Service and Maintenance for Cylindrical Locks
5–6 W Series Service Manual
Task E. To remove the bushings, trim hole inserts, and hub washers:
Remove the bushings, trim hole inserts, and hub washers from each
side of the door.
Task F. To remove the RQE rose liner:
1. Remove the through-bolts from the top and bottom holes in the
RQE rose liner.
2. Slide the rose liner off the door.
Task G. To remove the lock chassis:
Slide the lock chassis out of the door.
Figure 5.7 Removing the bushings, trim hole inserts, and hub washers
Bushing
Trim hole insert
Outside of door
Hub washer
Inside of door
Hub washer
Bushing
Trim hole insert
Bushing