34
•
Grease the pistons, insert the anti-extrusion rings and rear gaskets.
•
Using plug code 77.3944, position the rear packs in the housings of the rear glands
and seat them as far as they will go with the plug.
10.9 Re-assembly of head and sleeves
•
Turn the shaft so as to expose the three pistons and grease.
•
Grease the O-Ring on the outer diameter of each sleeve.
•
Make sure that the rear packs are positioned in their housings, using plug code
77.3944-77.3958.
•
Fit the O-Rings in their housings on the crankcase spacer. Apply a little grease to
make sure they remain in position.
Plug
Grease the pistons
Grease the
O-rings
Grease the
O-rings
Summary of Contents for 74.1030.97.3
Page 39: ...39...
Page 40: ...40 PART No 74 0066 99 2 REV 00...
