BERTHOLD TECHNOLOGIES LB 480, User Manual

Page: 370 / 450

54733-10BA2L
3 – 370
02.2017
Menu Structure Volume 3
5 Loop Current Mode
Indicates whether the current output is active or frozen. The follow-
ing displays are possible:
• ENABLED
The current output is active.
• DISABLED
The current output is frozen.
The current output is frozen in the following cases:
– if it is set to fault current
– in multi-drop mode (
Set Poll Address
, see page 3-362 )
– in test mode
6 Loop test
Allows you to selectively output current values at the current out-
put. Thus you can check the correct function of the current output
and the display value in the process control system. Enter the
desired value in mA.
2.41
Plateau
Menu path: Device Config

Setup

Service

Plateau .
This menu leads to the plateau measurement and to the display of
the plateau values.
1 Plateau Measurement
Leads to the plateau measurement ( page 3-371 ).
2 Plateau View
Enables the display of the plateau data in a table or as a plateau
curve.
3 Plateau Information
General information on the plateau measurement.