|1
CONTENTS:
ASSEMBLY:
PLEASE READ THESE INSTRUCTIONS COMPLETELY
BEFORE ATTEMPTING TO ASSEMBLE YOUR NEW
2-IN-1 HUMMINGBIRD & BIRD SEED FEEDER
Flower Port Cover
Hummingbird Perch Ring
& Food Dish
Please note, images of parts are not to scale with one another.
Hummingbird Food/Water
Reservoir
Upper Bird Feeder Assembly
Pre Assembly Preparation:
1. Note: The 2-in-1 Hummingbird & Bird Seed Feeder is designed for easy assembly but please use
caution when assembling.
2. Prior to assembly take time to find a suitable location for your 2-in-1 Hummingbird & Bird Seed
Feeder and make sure to assemble your new 2-in-1 Hummingbird & Bird Seed Feeder on spacious
and clean work surface.
3. Use Diagram 1 for reference on part names, assembly and how all the individual parts fit together.
4. Observe all safety precautions.
2-in-1 Hummingbird & Bird Seed Feeder Owners Manual
Assembling The Lower Bird Feeder Assembly:
1. On a flat even surface place the Hummingbird Food/Water Reservoir with the open end
facing up, fill with your choice of hummingbird food/water (see recommendation later in this
instruction) approximately 80% full (Figure 1 & Figure 1 arrow).
2. Set the Hummingbird Food Dish/Perch Ring upside down on the Hummingbird Food/Water
Reservoir and screw onto the Hummingbird Food/Water Reservoir. Screw past the threads
and then push onto the rib to hold Hummingbird Food/Water Reservoir in place (Figure 2).
3. Take the Hummingbird Food Dish/Perch Ring turn it upside down and screw onto the Hum-
mingbird Food Reservoir snug but DO NOT OVER TIGHTEN (Figure 3 & 4).
4. Flip the assembled Hummingbird Food Reservoir/Hummingbird Food Dish/Perch Ring over
(Figure 5). The Hummingbird Food Dish will gravity feed/fill from the reservoir until an equilibri-
um is achieved.
5. Push down the Flower Cover Port till it is free from the rib (Figure 6 small black arrow),
Thread and tighten the Flower Cover Port until snug against the Hummingbird Food Dish/
Perch Ring but DO NOT OVER TIGHTEN (Figure 7).
Assembling The Upper Bird Feeder Assembly:
5. The Upper Bird Feeder Assembly comes pre-assembled. Set the Upper Bird Feeder As-
sembly Bird Perch Ring on a flat surface (Figure 7 arrow), press the Lock Button and pull up
to the Hanging Loop Lock Ring, this will allow you to lift up the Bird Seed Fill Cover. (Figure 8).
Set the Bird Seed Fill Cover to the side of the Upper Bird Feeder Assembly.
6. Fill with your choice of bird seed (see recommendations later in this instruction). Fill approx-
imately 80% (Figure 9 Black arrows).
7. Put the Bird Seed Fill Cover back onto the top of the Bird Seed Reservoir (Figure 10), press
the Lock button and pull up on the Hanging Cable to tighten (Figure 11).
Hummingbird
Food Dish
Hummingbird
Perch Ring
Flower Cover
Port
Ribs
Hummingbird
Food/Water
Reservoir
LOWER BIRD FEEDER
ASSEMBLY
Bird Perch
Ring
Diagram 1:
Bird Seed
Reservoir
Bird Seed
Food Dish
Bird Seed
Fill Cover
Hanging
Cable
Lock
Button
UPPER BIRD FEEDER
ASSEMBLY
Hanging Hoop
Lock Ring
Hanging
Hoop
