Care and maintenance
67
> To calibrate the front screen, tap «Calibrating the front screen» (1).
1
2
– A cross will be displayed on the screen.
> Tap the middle of the cross with a blunt object.
– Further crosses will be shown on the screen one by one in different positions.
> Tap the middle of each cross.
–
If no further crosses are shown, the relevant screen has been calibrated.
If a second screen ist connected at the rear of the machine, it must be calibrated in the same way. To do
that, tap «Calibrating the rear display» (2) on the «Calibrate screen» screen.
Cleaning the bobbin case
CAUTION
Electronically driven components
Risk of injury near the needle and the hook.
> Switch off the machine and disconnect it from the power supply.
> Open the hook cover.
> Remove the bobbin case.
> Remove the bobbin from the bobbin case.
> Remove dust, fabric and thread remnants with the brush.
– If fabric and thread remnants have become caught under the brake spring, the brake spring must be
removed.
> To remove the brake spring, push a flat object (e.g. screwdriver) under the brake spring until it jumps
out.
> After cleaning, fit the brake spring back into the bobbin case.
