Bernina 765 SPECIAL EDITION Manual Download Page 63

Page: 63 / 200

Setup Program

Adjusting the sewing light

The brightness of the sewing light can be adjusted corresponding to the personal preferences.

> Touch the icon «Setup Program».

> Touch the icon «Machine settings».

> Touch the icon «Adjust the brightness».
> Move the slide in the upper portion of the display using the touchscreen pen/finger or touch the icons

«+» or «-» to alter the brightness of the sewing light.

> Touch the switch to switch the sewing light off.
> Touch the switch again to switch the sewing light on.

Calibrating the display

Please find further information on this topic in the chapter attachment below troubleshooting at the end of
the instruction manual.

> Touch the icon «Setup Program».

> Touch the icon «Machine settings».

> Touch the icon «Calibrate the display».
> Touch the crosses in sequence using the touchscreen pen.

Back to default setting

ATTENTION:

Using this function will delete all individually made settings.

> Touch the icon «Setup Program».

> Touch the icon «Machine settings».

Summary of Contents for 765 SPECIAL EDITION









































































































































































































Search results

Summary of Contents for 765 SPECIAL EDITION

Reviews:

Brands by name

Popular brands

Bernina 765 SPECIAL EDITION, Manual

Search results

Summary of Contents for 765 SPECIAL EDITION

Reviews:

Brands by name

Popular brands