manualshive.com logo in svg

Bernina 765 SPECIAL EDITION, Manual

Share
Download
Bernina 765 SPECIAL EDITION Manual Download Page 49

Sewing preparation

49

> Pull the excess thread over the thread cutter at the engaging lever (5) and cut.

5

> Push the engaging lever (6) towards the bobbin.

6

– The machine winds and the display to wind the bobbin appears.

> Move the slide on the display using the touchscreen pen/finger to adjust the winding speed.
> To stop the winding process, the engaging lever must the pressed to the right.
> Push the engaging lever towards the bobbin again to continue the winding process.

– As soon as the bobbin is full, the machine stops the winding process automatically.

> Remove the bobbin and cut the thread using the thread cutter at the engaging lever.

Threading the bobbin thread

Prerequisite:

•

The needle is raised.

•

The machine is switched off and the bobbin cover is opened.

> Press the bobbin case release at the bobbin case (1).

1

> Remove the boobin case.
> Remove the bobbin from the bobbin case.

Summary of Contents for 765 SPECIAL EDITION









































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands