Practical stitches
85
For invisible hems in medium to heavy weight cotton, wool and blended materials.
Prerequisite:
•
The fabric edges are finished.
> Fit the Blindstitch Foot #5.
> Tap «Practical Stitches».
> Select Blind stitch No. 9.
> Fold the fabric back over the right side of the fabric to expose the overcast edge.
> Place the fabric under the presser foot and move the folded edge against the metal guide on the presser
foot.
> Guide the folded edge evenly along the metal guide of the presser foot to sew the stitches evenly deep.
– Make sure that the needle only pierces the edge of the fold.
> After sewing about 10 cm, check both sides of the fabric and adjust the width again if necessary.
5/8
5/8
5/8
1
25
15
15
15
75
75
6.18 Sewing visible hems
The visible hem is particularly suitable for elastic seams in tricot made of cotton, wool, synthetic and mixed
fibers.
> Fit the Reverse Pattern Foot #1C/1D.
> Tap «Practical Stitches».
> Select Tricot stitch No. 14.
> Iron the hem and baste if necessary.
> Reduce the Presser Foot Pressure if necessary.
> Sew the hem in the desired depth on the right side.
> Trim off the remaining fabric on the reverse side.
