Setup Program
51
> To deactivate the sound of the beeper when using the BSR Modes, tap «Switch Sounds On/Off» in the
sector (4).
3.5 Machine settings
Selecting a language
The User Interface can be programmed in different languages according to the customer's wish because
BERNINA provides a wide range of international languages for the customers. Via firmware updates
additional languages for the User Interface can be provided.
> Tap «Setup Program».
> Tap «Machine Settings».
> Tap «Language Selection».
> Select a language.
Adjusting the brightness of the display
The brightness of the display can be set to meet your individual needs.
> Tap «Setup Program».
> Tap «Machine Settings».
> Tap «Screen Settings».
> Adjust the brightness of the display in the upper section of the screen.
Adjusting the sewing light
You can set the brightness of the sewing light to meet your individual needs.
> Tap «Setup Program».
> Tap «Machine Settings».
> Tap «Screen Settings».
> Adjust the brightness of the sewing light in the lower section of the screen.
> Tap the switch to switch the sewing light off.
> Tap the switch again to switch the sewing light on.
