Embroidery preparation
42
> Pull the thread beneath the attached foot over the thread cutter (15) and cut.
15
Winding the bobbin thread
The bobbin thread can be wound while embroidering if the retractable spool pin is used for winding.
Prerequisite:
•
The foam pad, the thread spool and the appropriate thread disc are positioned.
> Attach the empty bobbin on the winding unit so that the silvery sensor surface is down.
> Guide the thread to the left into the rear thread guide (1).
> Guide the thread around the thread pretension clockwise (2).
> Wind the thread clockwise 2 to 3 times around the empty bobbin (3).
> Pull the thread over the thread cutter at the engaging lever (4) and cut.
1
3
4
2
Summary of Contents for 500 E
Page 1: ...BERNINA 500...
Page 157: ......
